Emulic LUB 1
Featured product
Readily biodegradable
Natural ingredients
No CLP/GHS classification
Safe product
High effectiveness
Not tested on animals
Made in Poland
Available in:
General information
Lubricant for water-based drilling fluids.
Emulic LUB 1 is a mixture of fatty acid derivatives, surfactants and
high-pressure and anti-wear additives.
The product is easily biodegradable and is not classified as hazardous according to REACH and CLP.
Emulic LUB 1 is a mixture of fatty acid derivatives, surfactants and
high-pressure and anti-wear additives.
The product is easily biodegradable and is not classified as hazardous according to REACH and CLP.
Properties
Microemulsions obtained with Emulic LUB 1 are stable, even in high brine concentrations. Lubricating properties measured with the EP Tester FANN device for a working fluid prepared with Emulic LUB 1 are as follows:
• the coefficient of friction for water at a pressure of 150 lbin at 60 rpm is 0.09
• the pressure force at which scuffing occurs for water is 550 lbin.
• the coefficient of friction for water at a pressure of 150 lbin at 60 rpm is 0.09
• the pressure force at which scuffing occurs for water is 550 lbin.
Application
Emulic LUB 1 at an addition of 0.1% by volume reduces the coefficient of friction of tap water from 0.41 to 0.09.
Addition of the product to drilling fluid causes a reduction in torque, a reduction in the coefficient of friction and in pulling of drill pipe, especially in directional and curved holes.
Addition of the product to drilling fluid causes a reduction in torque, a reduction in the coefficient of friction and in pulling of drill pipe, especially in directional and curved holes.